Obihai OBi100 Administration Manual page 34

175
176
177
Additional Configuration Options Available with the OBi IVR after Pressing * * * 0 for SIP Service Provider Two (SP2):
Selection
(Always Press "#" After Entering
Selection)
200
201
202
267
SP1 Call Forward on Busy Number
SP1 Call Forward on No Answer –
Enable / Disable
SP1 Call Forward on No Answer
Number
Announcement
Enable Service Provider One (SP2)
The current value will be read back.
Registration State of SP2
The current value will be read back.
SP2 User ID
The current value will be read back.
SP2 Block Caller ID Enable
Copyright 2010-2013 Obihai Technology, Inc.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
What Can You Do?
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 1 to enter a new value.
34