Obihai OBi100 Administration Manual page 11

LED Description and LED Behaviour
There are four (4) LED lights on the top of the OBi. They are used to provide the user with a visual indication of the working
order and general status of key functional aspects of the OBi device. Under normal operating conditions the LEDs should
show green (solid or blinking) signals.
Here below, are specific details/explanation of the OBi LED description and behaviour.
LED Icon
LED Icon
LED Icon
OBi100 & OBi110:
OBi202 & OBi302:
OBi200/OBi300:
Light Behavior
Off
Solid Green
Flashing Green
Flashing Orange
Solid Red
Light Behavior
Flashing Green (Intermittent)
Flashing Green (Intermittent)
Light Behavior
Off
Solid Green
Flashing Green
Fast Flashing Green
Copyright 2010-2013 Obihai Technology, Inc.
What It Means
The OBi is not receiving power.
The OBi is operational.
The OBi is looking for a DHCP IP address.
The OBi is upgrading. DO NOT remove power!
The OBi is non-operational.
What It Means
Light flashes when there is data activity on the
OBi Internet Ethernet port.
Light flashes when there is data activity on the
OBi LAN Ethernet port. (OBi202 Only)
What It Means
The port is not enabled. Otherwise:
- If the Primary Line is the
PSTN LINE, indicates OBiTALK
service is not available.
- If Primary Line is
SP1/SP2/OBiTALK, indicates
the corresponding primary
service is not available (but
the secondary services may
still be available).
The phone is ready to be used:
- If the Primary Line is the
PSTN LINE, indicates OBiTALK
service is available.
- If the Primary Line is
SP1/SP2/OBiTALK, indicates
the corresponding primary
service is available.
The phone is in use.
The phone is ringing.
11