Obihai OBi100 Administration Manual page 154

BridgedOutboundCallMaxDuration
Line Port Parameter Guide: Continued . . .
Parameter
PSTN Disconnect Detection
DetectCPC
CPCTimeThreshold
Note: It is possible for a user to set this parameter
from the phone using a Star Code
Limit on the call duration in seconds for all
outbound calls that are bridged from another
trunk. A blank or 0 value implies the call duration is
not limited.
Description
Enable CPC signal detection. If enabled, OBi will consider the PSTN call
ended once it detects a CPC signal during a connected call on the PSTN
line. It then proceeds to tear down the call and takes the LINE port
hardware to the On-Hook state
Minimum duration in milliseconds to declare CPC signal
Copyright 2010-2013 Obihai Technology, Inc.
Default Setting
Yes
450
154