Obihai OBi100 Administration Manual page 32

41
42
43
44
46
SIP Service Provider Configuration Options
Additional Configuration Options Available with the OBi IVR after Pressing * * * 0 for SIP Service Provider One (SP1):
Selection
(Always Press "#" After Entering
Selection)
100
IP Address
The current value of the IP address will
be read back.
Default Gateway
The current value of the default
internet gateway will be read back.
Subnet Mask
The current value of the subnet mask
will be read back.
DNS Server (Primary)
The current value of the primary DNS
server will be read back.
NTP Server (Secondary)
The current value of the Secondary
NTP server will be read back.
Announcement
Enable Service Provider One (SP1)
The current value will be read back.
Copyright 2010-2013 Obihai Technology, Inc.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
Press # to enter another configuration
selection.
What Can You Do?
Press 1 to enter a new value.
Press 2 to set the default value.
Press 0 to repeat the information.
32