Checking The Circuit Breaker - Xerox 6279 User Manual

Product Overview
4. Move the printer Circuit Breaker switch to the Off (down) position.

Checking the Circuit Breaker

The Circuit Breaker opens automatically and removes input power from the machine if
a short circuit or current condition occurs.
When the Circuit Breaker Switch is in the up position, input power is supplied to the
machine. If the machine will not be used for an extended amount of time, the printer
and controller may be powered down.
Check the Circuit Breaker once a month for correct operation. If you notice any unusual
conditions, contact your Xerox Customer Support Center.
The Procedure for checking the Circuit Breaker is as follows:
1. Perform steps 1 and 2 of the System Power Off Procedure.
2. Press the Test button while the Circuit Breaker switch is in the on (up) position. If the
Circuit Breaker turns off, it is operating correctly.
3. Reset the printer Circuit Breaker switch and perform the System Power On Procedure.
® ® 1-19
Xerox 6279 Wide Format Solution
Copy/Scan User Guide