Configure The Reader Using Intermec Settings - Intermec 730 User Manual

Chapter 6 — Scanner Support

Configure the Reader Using Intermec Settings

184
You should also adjust its settings using the Intermec Settings applet. In-
formation about the settings you can configure with this applet is de-
scribed in the Intermec Computer Command Reference Manual. The online
manual is available from the Intermec web site at www.intermec.com.
1 Connect your reader to the reader port.
1 From the 700 Color Computer, tap Start > Settings > the System tab >
the Intermec Settings icon > the RFID option.
2 Tap (+) to expand Reader 1 and ensure Reader Model shows "IP4" as
the model of choice. If not, then tap Reader Model, tap its drop-down,
then select "IP4."
700 Series Color Mobile Computer User's Manual