Basic - Intermec 730 User Manual

700 Series Color Mobile Computer User's Manual
Use the Profiles page to select and configure between the networking envi-
ronments assigned to this 802.11b or 802.11b/g radio.
S Profile:
Tap the drop-down list to choose between four different profiles as-
signed to this unit, then tap Edit Select Profile, make the changes need-
ed for this profile (starting on the next page), then tap OK to return to
the Profiles page.
S Enable Microsoft's Wireless Zero Config
Check this box to enable Microsoft's Wireless Zero Config application.
This effectively disables the Intermec software solution for 802.11b or
802.11b/g, including configuration via the Wireless Network applet.

Basic

Use the Basic page to set the network type, name, and manage battery
power for this profile. Tap ok to return to the Profiles page.
S Profile Label:
Enter a unique name for your profile.
S Network type:
Tap the drop-down list to select either "Infrastructure" if your network
uses access points to provide connectivity to the corporate network or
internet; or "Ad-Hoc" to set up a private network with one or more par-
ticipants.
S Channel:
If you selected "Ad-Hoc" for the network type, select the channel on
which you are communicating with others in your network. There are
up to 11 channels available.
S SSID (Network Name):
This assumes the profile name unless another name is entered in this field.
If you want to connect to the next available network or are not familiar
with the network name, enter "ANY" in this field. Consult your LAN
administrator for network names.
Appendix A — Configurable Settings
237