Copying Cdma Radio Module Cab Files From Intermec Web Site; Via Microsoft Activesync; Via A Compactflash Or Secure Digital Storage Card - Intermec 730 User Manual

700 Series Color Mobile Computer User's Manual

Copying CDMA Radio Module CAB Files from Intermec Web Site

Copy CAB files from the Intermec web site at www.intermec.com onto
your desktop. Intermec recommends one of two methods with which to
load these CAB files onto your 760 Computer:
S via the Microsoft ActiveSync application
S via a CompactFlash or Secure Digital storage card. See Chapter 3,
"Installing Applications," for information about these methods.

Via Microsoft ActiveSync

You can transfer files from your desktop to your 760 Computer via Micro-
soft ActiveSync. See Chapter 2, "Windows Mobile 2003" for more infor-
mation about ActiveSync.
1 Obtain software from the Intermec web site as described earlier. Down-
load the software to any location on your 760 Computer, such as the
Temp folder via the My Device root location.
2 Tap the carrier CAB file to install the application.
3 Go to "Finishing the Installation" on page 132.

Via a CompactFlash or Secure Digital Storage Card

Note: These instructions are based on default locations. You can change
the location to which to copy your CAB files.
1 Make sure the Registry Restore feature on your 760 Computer is dis-
abled. Select Start > Settings > the System tab. Tap the Utilities desk-
top icon, the Registry Save tab, then clear the Enable Registry Save box.
2 Copy the CAB files for your carrier to your CompactFlash or Secure
Digital storage card after downloading it from the web site.
3 Cold-boot your 760 Computer. Remove the AB10 battery pack and
press the reset button in the bottom of the battery compartment.
4 Go through the normal getting started steps detailed in your 700 Color
CDMA Radio Setup Quick Start Guide.
Chapter 4 — Network Support
131