Ending A Connection; Management; Smartsystemst Foundation Console (Www.intermec.com/Smartsystems) - Intermec 730 User Manual

Chapter 4 — Network Support

Ending a Connection

Management

SmartSystemst Foundation Console (www.intermec.com/SmartSystems)

156
4 Enter your user name, password, and domain name as provided by your
ISP or network administrator. If a domain name was not provided, try
the connection without entering a domain name.
5 You should not need to change any Advanced settings. Instances where
to change advanced settings include the server to which you are con-
necting does not use dynamically-assigned addresses, and you need to
enter your TCP/IP settings; or to change server DNS or WINS settings.
To change advanced settings, tap Advanced. Otherwise, tap Finish. In-
sert necessary equipment, such as a network (Ethernet) card, into the
device, and use a desired program to automatically begin connecting.
When connected via modem or VPN, tap the Connectivity icon on the
navigation bar, and then select Disconnect. When connected via cable or
cradle, detach your device. When connected via Infrared, move the device
away from the other computer or device. When connected via a wireless
network, switch off the connection.
Use the following tool and information to configure and manage your net-
work. You can also contact your Intermec representative for support.
This tool, available as a free download from Intermec, includes a manage-
ment console that provides a default method to configure and manage In-
termec devices "out-of-the-box," without the purchase of additional soft-
ware licenses. This is for anyone who must configure and deploy multiple
devices or manage multiple licenses.
Use the Intermec Settings applet to gather, view, and update device config-
uration settings within the SmartSystems Foundation. Information about
700 Series Color Mobile Computer User's Manual