700 Series Color Mobile Computer User's Manual
When you change the IP address using the Intermec Settings applet, the
information is lost when you perform a warm-boot, and the original IP
address is used.
You must load the REGFLUSH.CAB file before running the Registry Save
application. Once you do, perform a warm-boot to keep the IP address.
To install the Registry Save application after a cold-boot is performed,
change the properties of the REGFLUSH.CAB file to that of read-only.
Using ActiveSync, copy the CAB file to the "Flash File Store\Persistent
Copy\CabFiles" folder on the 700 Color Computer, then perform a cold-
boot to load this CAB file.
Deleting the Old Registry File
1 On the original 700 Color Computer, select Start > Programs > the File
Explorer icon, then tap My Device > Flash File Store. Scroll down to
the bottom of the list of files and folders, press and hold your stylus in
the white area beneath for a pop-up menu, then select View All Files.
2 Look for a "registry" file. If one exists, select to highlight that file, press
and hold for a pop-up menu, select Delete, then Yes to remove this file.
Downloading the RegFlush CAB File
1 Using your web browser, go to the Intermec web site at
www.intermec.com/developersupport. Note that this is subject to change.
2 Select Pen Notepads > 700 Color Series > Downloads > Tools.
3 Scroll down for the "Registry Save Utility (regflush.CAB)" header.
4 Click Download next to this header to download the CAB file to a loca-
tion on your desktop.
—
Chapter 3
Installing Applications
89