Set Time and Date
Configuration Bar Codes
Audio Volume
700 Series Color Mobile Computer User's Manual
This command sets the date and time on the 700 Color Computer. The
default date and time is June 1, 1999 at 12:00 AM.
From the network, send the following:
/+ yyyymmddhhmmss
where acceptable values for the date are:
0000–9999
yyyy
01–12
mm
01–31
dd
00–23
hh
00–59
mm
00–59
ss
You can also set the time and date by using Configuration Management in
Unit Manager, or by using the Clock applet in the Settings menu. To
access this applet, tap Start > Settings > the System tab > the Clock icon.
You can change some settings on your 700 Color Computer by scanning
the following Code 39 bar code labels.
Note: When you use a bar code creation utility to make a scannable bar
code label, the utility probably adds opening and closing asterisks automat-
ically. Asterisks are included here for translation purposes.
Note: The Audio Volume parameter information is on page 253.
Turn Audio Off
*$+BV0*
*$+BV0*
Appendix
A
—
Year
Month of the year
Day of the month
Hour
Minutes
Seconds
Configurable Settings
255