Vibrator - Intermec 730 User Manual

Chapter 1 — Introduction

Vibrator

20
3 Insert the storage card, with the contacts facing the keypad, into your
700 Color Computer to ensure that no adhesive is exposed once the tab
is placed.
Note: This information does not apply to the 730 Computer.
If your 700 Color Computer is built with an imager or scanner and the
vibrator is disabled, do the following instructions to enable the vibrator. If
you are not able to enable the vibrator, then contact Customer Support.
For information about setting volume levels for screen taps, ActiveSync
alert noises, etc., tap Start
Notifications.
Note: Each time the 700 Color Computer is cold-booted, all default set-
tings are restored.
Do the following to enable the vibrator for the 700 Color Computer. Tap
Start > Settings > the System tab > the Intermec Settings icon. Tap the
Device Settings option, tap (+) to expand Beeper, then tap (+) to expand
Vibrate. Select an item, then close this option.
Note: Information about the settings you can configure with the Intermec
Settings applet is described in the Intermec Computer Command Reference
Manual. The online manual is available from the Intermec web site at
www.intermec.com
Keypad facing down
Help > Pocket PC Basics
>
700 Series Color Mobile Computer User's Manual
, then select