Page 1
User’s Manual 741 and 751 Mobile Computers (Windows Mobile 5.0)
Page 2
The information contained herein is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec Technologies Corporation.
Removing the SD Card..........21 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual .
Page 4
Configuring the Computer Parameters ........38 Configuring the Computer With Intermec Settings ..... . . 38 Remotely Configuring the Computer Using SmartSystems Foundation .
Page 5
Choosing Between Microsoft and Funk Security ......50 Configuring Funk Security Using Intermec Settings ....50 Configuring Funk Security Using the Profile Wizard .
Page 6
Contents 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at Warranty. Disclaimer of warranties: The sample code included in this document is presented for reference only.
Service Service contracts Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local representative, from the Intermec web site, click Contact. Who Should Read This Manual This document is written for the person who is responsible for installing, configuring, and maintaining the 741 or 751 Mobile Computer.
To order printed versions of the Intermec manuals, contact your local Intermec representative or distributor. Patent Information Product is covered by one or more of the following patents: 4,882,476; 4,894,523; 4,953,113; 4,961,043; 4,970,379; 4,988,852; 5,019,699; 5,021,642; 5,038,024; 5,081,343; 5,095,197; 5,144,119;...
Page 10
Before You Begin 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
This chapter introduces the 741 and 751 Color Mobile Computer with Windows Mobile 5.0. Throughout this manual, the computers are referred to as 741, 751, or computer. This chapter contains hardware and software configuration information to assist you in making the most out of your computer.
Make sure you put the computer into a suspend (sleep) mode before you remove the main battery. If you have at least one device in your 741 or 751 (radio, scanner, or imager), the battery power fail level is set so that after the system shuts...
5 Click ok to exit. Installing and Charging the Battery Make sure you fully charge the battery before you use your 741 or 751. To charge the battery, you need to install it in the computer. To install the battery 1 Remove the two thumb screws on the connector cover to release the hand strap and back cover.
3 Tilt, insert, and place the battery into the compartment. Make sure the battery compartment latch clicks in place to ensure the battery is secure. 4 Insert your 741 or 751 into its single dock for charging. 5 Charge the battery pack for three hours before using.
To adjust the ambient light sensor 1 Tap Start > Settings > the System tab > Backlight. 2 Tap the Both Power tab. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 1 — Using the Computer Battery compartment latch...
The speaker, which is capable of variable volume levels, is located on the back of the 741 and 751. This speaker has a transducer volume of 85 dB min at 10 cm (3.9 in) and a frequency range of 1 to 8 KHz.
External Headset Jack Location on the Computer Adjusting the Beeper Volume Note: Each time you perform a cold boot on the 741 or 751, all default settings are restored. You can adjust the computer volume for your needs and your environment.
Page 18
To enable the vibrate feature 1 Tap Start > Settings > the System tab > Intermec Settings. 2 Tap Device Settings > Good Read > Internal Scanner > Beep or Vibrate > Vibrate.
Using the Keypad Your 741 and 751 mobile computer has one of the following keypad options: • 22-key numeric keypad • 39-key alphanumeric keypad Use the following sections to understand how to use the keypad. For information on remapping the keypad, you can download the Device IDL Resource Kit from the Intermec web site at www.intermec.com/idl.
Utilities application. Go to Start > Settings > the System tab > Utilities > the App Launch tab. ) or the orange/white (c) plane key for each orange key. To turn the front light off, press 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual for information about...
CAPS LOCK until you press in CAPS mode, you stay in CAPS until it is pressed again. Press enter a space. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual “Understanding Windows Mobile” on page 19 To Do This Toggle the backlight on or off.
Alpha Plane Key Sequences To Enter Press These Keys To Enter Press These Keys d g A d g B d g C d g D 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual ) is red to indicate...
VGA display with 240 x 320 pixels. The default Today screen has three distinct areas: the Navigation bar, the Today screen, and the Command bar. The Windows Mobile Today Screen 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 1 — Using the Computer To Enter...
The 802.11b/g radio is connected to the wireless network. The computer is connected through the USB port to your desktop The iConnect application icon. Tap it to set up Ethernet or Wireless settings. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual for more information...
When the computer is back in charging range, charging resumes and the LED changes to red or green. Alternating Red/Yellow Replace the battery pack. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 1 — Using the Computer “Clean Booting the Computer” on page Battery status...
• DataMatrix (area imagers only) If you are using bar code labels that are encoded in a different symbology, you need to enable the symbology on the computer. Use Intermec Settings to enable and disable symbologies for your scanner. For help using Intermec...
Using the area imager is very similar to taking a picture with a digital camera. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 1 — Using the Computer...
• Choose a Predefined Mode in Intermec Settings: a Tap Start > Settings > the System tab > Intermec Settings. b Tap Data Collection > Internal Scanner > Imager Settings >...
Communicate With a Wireless Scanner” on page Installing a Storage Card The 741 supports the use of CompactFlash cards and Secure Digital (SD) cards. The 751 does not support the use of SD cards because the 802.11 radio occupies the CompactFlash card slot.
Chapter 1 — Using the Computer Attaching a Tab to the SD Card The SD card, as ordered from Intermec, come with acrylic adhesive pull tabs. If you are using a storage card that you plan to remove from the computer, this tab can make its removal easier.
3 Replace the storage media access door. 4 Press the Power key for two to three seconds, and then release the Power key to turn on the computer. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 1 — Using the Computer...
Page 32
Chapter 1 — Using the Computer 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
• Understanding Windows Mobile 5.0 • Finding Information in Windows Mobile • Learning the Basic Skills • Using Microsoft ActiveSync • Using Internet Explorer Mobile 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual Understanding Windows Mobile 5.0...
The ActiveSync help on your desktop. To view Help, click Help > Microsoft ActiveSync Help. The readme files located in the Microsoft ActiveSync folder on the desktop and on the Windows Mobile Companion CD. www.microsoft.com/windowsmobile/resources/ communities/default.mspx 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual...
You can switch from one program to another by selecting it from the Start menu. You can customize which programs you see on this menu. For information, see 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual Chapter 2 — Understanding Windows Mobile 5.0 “Global Services and Support” on page vi...
The command bar is located at the bottom of the screen. Use the command bar to perform tasks in programs. The command bar includes menu names, functions, and the Input Panel icon when needed. Windows Mobile Command Bar 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual...
The more you use the computer, the more it learns to anticipate what you are going to 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual Chapter 2 — Understanding Windows Mobile 5.0...
2 Write a letter in the box. In converts to typed text that appears on the screen. For specific instructions on using Block Recognizer, tap the question mark next to the writing area. 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual...
To convert the writing to text 1 Write your information on the screen with the stylus. 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual Chapter 2 — Understanding Windows Mobile 5.0 and select a command.
• A message box appears on the screen. • A sound, which you can specify, plays. • A light flashes on your computer. • The computer vibrates. 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual...
To open File Explorer • Tap Start > Programs > File Explorer. Once you open File Explorer, it becomes available from Start menu. 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual Chapter 2 — Understanding Windows Mobile 5.0...
You can view the status of the backup battery and determine the length of time it takes for the computer to turn off if not used. for more information about the Object Store. 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual “Installing...
You can install any program created for the 741 or 751 mobile computer, as long as there is enough memory. A popular place to find software for your computer is on the Windows Mobile Web site windowsmobile/resources/communities/default.mspx). Using Microsoft ActiveSync Use Microsoft ActiveSync to synchronize the information on your desktop with the information on the computer.
2 Tap Start > Internet Explorer. The default page that appears when you open Internet Explorer contains links to Intermec-specific information and to the Windows Mobile web site. 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual...
Page 45
Chapter 2 — Understanding Windows Mobile 5.0 Default Internet Explorer Web Page 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual...
Page 46
Chapter 2 — Understanding Windows Mobile 5.0 741 and 751 Color Mobile Computer (Windows Mobile 5.0) User’s Manual...
Configuring the Computer Use this chapter to understand how to configure the 741 and 751 to communicate in your network. In this chapter, you will find these sections: • Configuring the Computer Operating Parameters • Configuring Personal Area Networks • Configuring Local Area Networks •...
You can access Intermec Settings while running any application. To open Intermec Settings • Tap Start > Settings > the System tab > Intermec Settings. For detailed information on most of the commands available in Intermec Settings, see the Intermec Computer Command Reference Manual (P/N 073529).
Network time servers acquire Coordinated Universal Time (UTC) from an outside source such as the U.S. Naval Observatory (USNO). The 741 and 751 use Simple Network Time Protocol (SNTP) to synchronize with a network time server.
Page 50
COM ports (such as printing) registration. However, you must reactivate connections because these are not done automatically. You can also use Intermec Settings to turn on the radio and enable Bluetooth settings. Use this table to understand the settings you see in the Bluetooth menu in Intermec Settings.
To configure Bluetooth communications on the computer 1 Select Start > Settings > the System tab > Intermec Settings. 2 Select Communications > Bluetooth. 3 If you want to allow incoming connections from wireless scanners, you must enable these two parameters: •...
Chapter 3 — Configuring the Computer 9 Refresh Intermec Settings to see the Bluetooth scanner under Data Collection. You can now view and modify any symbology settings. To remove a wireless scanner from the computer 1 Select Start > Settings > the System tab > Bluetooth Scanner Wizard.
Steps 1 through 3. 5 Tap Print Test Page. The printer prints out the test page. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 3 — Configuring the Computer...
Your computer is a versatile mobile computer that easily adds to your wired or wireless data collection network. You can connect your computer to a network using: • USB communications. • 802.11 radio communications. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
5 Make sure that your computer is talking to the network and that the network can see your computer. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 3 — Configuring the Computer ) in the lower right corner of the Today...
To use wireless communications in a TCP/IP network 1 Go to Start > Settings > the Systems tab > Intermec Settings. 2 Configure these network parameters on each 751 in the network: •...
• Authentication by both the network and the user • Authentication is cryptographically protected • Transmitted data 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 3 — Configuring the Computer “Configuring Security on the Wireless on this page.
Page 58
802.11 standard ratified in June 2004. WPA2 uses the Advanced Encryption Standard (AES) for data encryption and is eligible for FIPS (Federal Information Processing Standards) 140-2 compliance. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
Page 59
WPA and WPA2. Another authentication method for WPA and WPA2 would be the Pre-Shared Key (PSK). 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 3 — Configuring the Computer Description 802.11b/g uses this protocol to perform authentication.
Profile_1. To select a profile for Funk security 1 Select Start > Settings > the Systems tab > Intermec Settings. 2 Select Communications > 802.11 Radio > Funk Security. 3 Select Active Profile, choose a profile from the list, and save your settings.
Page 61
3 Open Intermec Settings. 4 Choose Communications > 802.11 Radio > Funk Security > Profile. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual a Certificate” on page a Server Common Name if you want to increase your level of security.
Page 62
You must enter a User Name and Subject Name. You can also enter 8 Exit Intermec Settings. a Certificate” on page a Server Common Name if you want to increase your level of security. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual “Loading...
751 is authenticated. You can have up to four profiles for different networks. For example, you may have different login names or passwords on different networks. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 3 — Configuring the Computer...
Page 64
2 For 8021x Security, choose None. 3 For Association, choose Open or Shared to match the settings on your access point. 4 For Encryption, choose WEP. ) in the lower right corner of the Today 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
Page 65
4 For Pre-Shared Key field, enter the passphrase as ASCII. The passphrase must be 8 to 63 characters and match the passphrase on the access point. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 3 — Configuring the Computer...
Page 66
It is comparable to EAP-TTLS, though not as flexible. To configure PEAP security 1 In the Profile Wizard, select the Security page. 2 For 8021x Security, choose PEAP. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
Page 67
To configure TLS security 1 In the Profile Wizard, select the Security page. 2 For 8021x Security, choose TLS. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 3 — Configuring the Computer “Loading a Certificate” on page...
Page 68
“tunnel” established using server certificates. To configure TTLS security 1 In the Profile Wizard, select the Security page. 2 For 8021x Security, choose TTLS. “Loading a Certificate” on page 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
Page 69
16 Tap OK. Configuring LEAP Security With Profile Wizard LEAP is the Cisco Lightweight version of EAP. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 3 — Configuring the Computer “Loading a Certificate” on page...
Page 70
(PACs), which CiscoSecure ACS generates using a master key known only to CicsoSecure ACS. EAP-FAST does not require certificate management. 1 In the Profile Wizard, select the Security page. 2 For 8021x Security, choose EAP-FAST. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
Page 71
11 If Allow Automatic PAC provisioning is selected, you can check: • Prompt before acquiring a new PAC for notification of any 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual incoming PACs. Chapter 3 — Configuring the Computer...
To select Microsoft security as your security choice 1 Select Start > Settings > the System tab > Intermec Settings. The Intermec Settings application appears. 2 Select Communications > 802.11 Radio > Security Choice.
Page 73
Set Authentication to WPA2-PSK. b Set Data Encryption to AES or TKIP. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual servers. Shared when WEP keys are required for association. Shared when WEP keys are required for association.
(DER-encoded .cer file without the private key) to import. 2 Tap the <<< button next to the Key Path field to select the private key (.pvk file) which corresponds to the user certificate chosen in Step 1. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
5 Tap OK to close the message box. Disabling Security If you choose not to use security with your wireless network, you can disable it on the CV30. Intermec recommends that you always set security in your network. To disable security 1 Open Intermec Settings.
Page 76
Chapter 3 — Configuring the Computer 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
• Developing Applications for the Computer • Installing Applications on the Computer • Freeing Up Virtual Memory for Applications • Launching an Application Automatically • Upgrading the System Software 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Developing and Installing Applications...
• develop a web-based application for the computer Developing a New Application Use the Intermec resource kits to develop new applications to run on the mobile computer. The Intermec resource kits are a library of C++ and .NET components grouped by functionality that you can use to create applications for the computer.
Page 79
Files copied to any of these locations are safe when you cold boot the computer as long as the AutoRun system is installed in the appropriate location. You can find information about this system in the Intermec Developer’s Library (IDL) Resource Kit Developer’s Guide which is available from www.intermec.com/idl.
For help using the console, see the online help. To use SmartSystems console to install an application 1 Download your application file from the Intermec web site and unzip it on your desktop PC. 2 Double-click the application file to install it. The application file should appear in the Software Vault.
My Windows Mobile-Based Device. 4 Insert the storage card back into the mobile computer. 5 Navigate to the storage card folder and run your application. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 4 — Developing and Installing Applications...
Note: InstallSelect is designed for use only by administrators, developers, integrators, or Intermec service representatives. Note: Do not run InstallSelect while using any other applications. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
Page 83
6 Tap Apply to initiate the clean boot and install only the files that are selected. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 4 — Developing and Installing Applications “Understanding or contact your...
Processes a specified file of commands and returns. Processes a specified file of commands and does not return. Loads a specified program and executes it. Loads a specified program and executes it. 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
When you upgrade your computer, you are updating the operating system (OS) and the Persistent Storage Manager (PSM) files. The PSM files are stored in the Flash File Store region, and deliver Intermec Value Add (IVA) functionality such as data collection, configuration, the Intermec wireless security suite, and the SmartSystems™...
You can use the SmartSystems console to upgrade the operating system on your computer. The console is part of SmartSystems Foundation and is available from the Intermec web site via the Intermec Developer Library (IDL). Before you can upgrade your computer, you need: •...
Page 87
• the device upgrade .exe file. This file is available from the Intermec web site at www.intermec.com. Go to Support > Downloads. Make sure the file you select is for your language. To upgrade the computer using SmartSystems console 1 Install SmartSystems Foundation on your PC and open the SmartSystems console.
Page 88
Chapter 4 — Developing and Installing Applications 741 and 751 Mobile Computers (Windows Mobile 5.0) User’s Manual...
This chapter contains these sections: • Calling Product Support • Troubleshooting the Computer • Resetting Your Computer • Cleaning the Scanner Window 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual Troubleshooting and Maintaining the Computer...
• If you are not using TE, know the language your custom application was written in and the tools you used to create it You can find most of the information listed above in Intermec Settings. Consult your application developer for information on your custom application.
You scan or enter an option for the Scanner Model configuration command and you hear three low beeps. 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 5 — Troubleshooting and Maintaining the Computer Solution • Make sure the backlight is on.
Page 92
The 751 does not save WEP key values when changing the SSID. Reenter the WEP key value after changing the SSID and save your changes. You should now be able to connect to the different access points. 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual...
Page 93
When you release a Scan button or handle trigger, the Good Read light does not turn off. 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 5 — Troubleshooting and Maintaining the Computer Solution Make sure that: •...
The computer may have decoded the bar code label in a symbology other than the label’s actual symbology. Try scanning the bar code label again. Make sure you scan the entire label. 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual...
To preserve application programs through a clean boot, you must store them in the Flash File Store. 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual Chapter 5 — Troubleshooting and Maintaining the Computer Reset button...
2 Dip a clean towel or rag in the ammonia solution and wring out the excess. 3 Wipe off the scanner window and screen. Do not allow any abrasive material to touch these surfaces. 4 Wipe dry. 741 and 751 Color Mobile Computers (Windows Mobile 5.0) User’s Manual...
Appendix A — Specifications Physical and Environmental Specifications Use these specifications to locate technical information about the 741 and 751 and their available features and options. Display 1/4 VGA Transflective, software-controlled backlight Pixels: Diagonal: Colors: Environmental Operating Temperature: Storage Temperature:...
Page 99
• Interleaved 2 of 5 • Matrix 2 of 5 • MaxiCode • Micro PDF417 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual Appendix A — Specifications Lithium-Ion (Li-ion), 7.2V, (2 x 2000 mAh cells), customer-replaceable 14.4 Watt-hours...
Page 100
Contact your local Intermec representative for more information. Below are minimum standard reading distances for the 741 and 751 built with integrated scan engines. When correctly mounted, and exit window reduces reading distances by about 4% for all scan engines, with the exception of the EL10 with its reading distances reduced by about 25%.
Page 101
0.25 mm (10 mils) 0.50 mm (20 mils) 1 mm (40 mils) UPC/EAN 0.33 mm (13 mils) PDF417 0.17 mm (6.6 mil) 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 0" 4" 8" 12" Data Matrix 7.5 mils PDF417 6.6 mils 0.125mm / 5mils...
Page 102
0.33 mm (13 mils) 4.98 cm (1.96 in) 0.254 mm (10 mils) 9.80 cm (3.86 in) 0.381 mm (15 mils) 7.77 cm (3.06 in) 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual 20" 24" 28" Maximum Distance 13.87 cm (5.46 in) 16.92 cm (6.66 in)
EV10 Minimum Reading Distances With 0.04 Inch Setbacks Accessories The following accessories are available for the 741 and 751. Note that this is not a complete list. Contact your local Intermec service representative for information about these and other accessories that are not in this list.
Page 104
Appendix A — Specifications 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual...
Index 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual...
Page 106
CKIP, description, clean boot process, storing files to rebuild system, cleaning, scanner window and screen, 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual...
Page 107
WPA2-PSK security with Funk security, with Microsoft security, WPA-PSK security with Funk security, 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual with Microsoft security, contents of SDMMC Disk folder, convert writing to text, copy files, using ActiveSync, customizing the computer, Data Collection &...
Page 108
Microsoft security configuring, description, selecting as security choice, navigating in Intermec Settings, navigation bar, using, Notes program, converting writing to text, Notification LED, understanding, notifications, setting up, 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual...
Page 109
Windows Mobile, switching from Start menu, radio, turning on Bluetooth, reading distances EA11 scanner, 90, EL10 scanner, 91, 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual EV10 scanner, 92, recharging time, regulatory approvals, remotely configuring computer, removing...
Page 110
Wavelink Avalanche, using to install applications, web enrollment, using to import user certificate, web-based application, developing, WEP security configuring with Funk security, with Microsoft security, with Profile Wizard, 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual...
Page 111
Bluetooth communications, creating an application to open the COM port, current wireless printer, selecting, 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual manually entering the device address, wireless scanner configuring Bluetooth communications, connecting to with association label,...
Page 112
Index 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual...
Page 114
Corporate Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com 741 and 751 Mobile Computer (Windows Mobile 5.0) User’s Manual *935-009-001* P/N 935-009-001...