Alpha (Blue) Plane Keys - Intermec 730 User Manual

Chapter 1 — Introduction
12
Alphanumeric Keypad
Note: This information does not apply to the 730 Computer.
The following table lists sequences that use the [Gold/White] c plane
key. See Chapter 2, "Windows Mobile 2003," for information about the
Pocket PC applications.
Press the Keys To Do This
c I
Toggle the backlight on or off (also goes through backlight
[Gold/White]
power levels if held down)
c A
Access the Pocket PC Record application (see Note).
[Gold/White]
c B
Access the Pocket PC Calendar application (see Note).
[Gold/White]
c C
Access the Pocket PC Contacts application (see Note).
[Gold/White]
c D
Access the Pocket PC Tasks application (see Note).
[Gold/White]
c J
Move up one page.
[Gold/White]
c G
Enter an asterisk (*).
[Gold/White]
c P
Move down one page.
[Gold/White]
c E
Access the Pocket PC Start menu.
[Gold/White]
c K
Enter an at symbol (@).
[Gold/White]
c H
Enter a backslash (/).
[Gold/White]
c L
Enter a minus sign (–).
[Gold/White]
c R
Enter a plus sign (+).
[Gold/White]
c l
Tab to the right.
[Gold/White]
c j
Tab to the left.
[Gold/White]
c k
Increase volume
[Gold/White]
c m
Decrease volume
[Gold/White]
Note: Pocket PC applications are accessible only if configured to do so in the App Launch
portion of the Utilities applet. See page 231 for more information.

Alpha (Blue) Plane Keys

The alphabet can be entered with either the numeric keypad or the alpha-
numeric keypad. Below and on the next page are the key sequences.
Numeric Keypad
When you press F, the Scanning/Alpha LED (C) shows 'red' for
the Alpha mode. The keypad stays in Alpha mode until you press F.
To type a lowercase 'c,' press F 2 2 2 (the [2] key three
times). To type a letter on the same key as the last letter entered, wait two
seconds, then enter the correct series of keystrokes to create the next letter.
While you are in the Alpha mode and you press 1 to initiate the CAPS
mode, you will render a CAPS LOCK until you press 1 again. Once
you are in CAPS mode, you stay in CAPS until it is pressed again.
Press 0 to enter a space.
700 Series Color Mobile Computer User's Manual