E Or 1553 Selected For Scanner Model - Intermec 730 User Manual

Chapter 6 — Scanner Support
178
4 Tap (+) to expand Scanner Settings, tap Scanner model, then enter the
applicable scanner, such as "1551E" or "1553."
5 Make sure a scanner is properly connected to your 700 Computer, tap
to check Enable scanner port, then tap File > Save Settings from the
bottom of the screen. These changes take several moments to reset.

1551E or 1553 Selected for Scanner Model

When "1551E" or "1553" is selected from the Scanner model option (see
step 4 above), and the port state is already enabled (see step 5), the process
will take several moments to reset. When 1551E or 1553 is successfully
connected during this step, the unit will emit some beeps. Here, the termi-
nal is initializing the scanner at 9600 for the baud rate, 7 data bits, even
parity, and 2 stop bits and synchronizing the terminal's configuration with
the attached scanner.
With "1551E" or "1553" selected, Symbologies, Symbology Options,
Hardware Trigger, and Scanner Port settings are configured from the In-
termec Settings applet. See the the Intermec Computer Command Reference
700 Series Color Mobile Computer User's Manual