Sprint Automated Activation Process - Intermec 730 User Manual

700 Series Color Mobile Computer User's Manual
9 Perform a cold-boot on your 760 Computer to uninstall the Watcher
application, which is intended for activation purposes only. Use the fol-
lowing for establishing and maintaining connection to the WAN radio:
S Custom application using Intermec WWAN Toolkit API
S Custom customer application using Connection Manager Interface
Note: When connecting to the WAN radio via Pocket PC Connection
Manager, use the 10-digit phone number@vzw3g.com for the user
name (such as 1234567890@vzw3g.com) and "vzw" for the password.

Sprint Automated Activation Process

Note: Sprint PCS uses a data provisioning method termed IOTA (Internet
Over The Air) to complete its activation and data enablement. These steps
detail how to properly activate and data provision your 760 Computer.
1 Give Sprint your ESN (either on the box or on a label inside the battery
compartment), rate plan, and account information. The label would in-
clude the term "ESN" and a bar code along with the serial number.
2 Sprint provides you with the following for each ESN:
S MDN, such as 214-555-5555
S MSID, such as 214-555-5555
S MSL/OTKSL (Activation Code), such as 945614
S NAI (Network Access Identifier), such as the following:
CustomerName103@sprintpcs.com
Use a Secure Digital storage card with only the Sprint_Watcher_PPC_
2002-03xxx.CAB file in the "\SDMMC\Cabfiles" folder. Other CAB files
in the "\SDMMC\Cabfiles" folder may cause problems with testing, re-
move or uninstall these before proceeding. At least 80% (4 of 5 bars)
CDMA signal strength for a successful over-the-air activation.
Download and Activate Sprint Watcher
1 Make sure the Registry Restore feature on your 760 Computer is dis-
abled. Select Start > Settings > the System tab. Tap the Utilities desk-
top icon, then the Registry Save tab. Clear Enable Registry Save.
Chapter 4 — Network Support
137