Page 2
Thank you for purchasing the Intermec Model 730 Color Mobile Computer with Microsoft Windows Mobile 2003. You will find your Model 730 useful in a variety of applications. Its integrated peripherals and rugged design ensure reliable service for years to come.
Model 730 Color Mobile Computer Description Navigational Imager/ Alpha Power Status ON/OFF Backlight Gold plane (Gold + 3) Alpha (Blue) plane key Front View IrDA Speaker Stylus Battery compartment Back View Model 730 Color Mobile Computer...
Secure Digital (SD) card slot Charging/Docking connector Headset jack Microphone Setting Up Your Model 730 Unclip Hand Strap and move Hand Strap out of the way. Hand strap clip-in slot Battery pack Remove Battery Pack and insert new or fresh pack.
Page 7
AC adapter or dock connected. 4 The first time you turn on your Model 730 it boots to the operating system. After a few seconds you see the Windows Mobile 2003 Welcome screen. Tap your stylus to advance to the next screen.
S Momentary Green: Indicates a ‘good scan’. S Blinking Green: Indicates that the imager is initial- izing. S Steady Red: Indicates the keypad is shifted to the Alpha (Blue) plane and the Model 730 is On. Model 730 Color Mobile Computer...
(similar to pressing the arrow keys on a keyboard). Battery Status LED Power to run your Model 730 is supplied by a power- ful Li-Ion battery pack designed to give you approxi- mately 6-10 hours of operation (depending on ap- plication).
S Up-to-date information on Windows Mobile 2003: <http://www.microsoft.com/windowsmobile> The Today Screen When you turn on your Model 730 for the first time each day you’ll see the Today screen. You can also dis- play it by tapping then tap Today. On the Today screen, you can see at a glance the information you need for the day.
Page 11
Tap to switch to a program Tap to change date and time Tap to establish ownership info Your day at a glance Tap to create a new item Model 730 Color Mobile Computer...
Use the menus and buttons to perform tasks in programs. Pop-up Menus With pop-up menus, you can quickly choose an ac- tion for an item. Tap to select an option Tap outside window to cancel Model 730 Color Mobile Computer...
Entering Information into Your Model 730 You can enter information in any program on your Model 730 by typing on the keypad or by using one of the on-screen imput options, such as Block Recog- nizer. For more information regarding the options shown in the following pop-up menu, refer to the 700 Series Color Mobile Computer User’s Manual (p/n:...
Options are 1-5 minutes with the default being 3 minutes. Tap on Settings Tap on the Power icon Observe the remaining battery capacity Observe the backup battery capacity Change options to conserve battery use Model 730 Color Mobile Computer...
Linear Imager Your Model 730 comes preloaded with software need- ed to read barcodes using the Linear Imager. To modify the default settings, use the Data Collection Applet. Data Collection Applet To change any default settings tap Start>Settings>Sys- tem> then the Data Collection applet. For more de- tailed explanation of bar codes refer to the 700 Series Color Mobile Computer User’s Manual (p/n:...
700 Series Color Mobile Computer User’s Manual (p/n: 961-054-031). Select Connections tab and the Bluetooth applet. To change your wireless printing so it connects to remote devices tap the On radio button. Model 730 Color Mobile Computer...
961-054-031). Select System tab and Wireless Network applet Warm Resetting Your Model 730 A warm reset may be necessary to correct conditions where an application stops responding to the system. A warm reset causes all running programs to be un- loaded, but all programs and data remain in the object store.
Check to ensure that your AC adapter or dock is plugged in and that it is making good contact with your mobile computer. Model 730 will not turn On when I key is pressed The battery may be low and need recharging.
If this condition continues for a long period of time it will run down the battery unless it is connected to external power. In the rare event that your Model 730 locks up, do a Warm Reset and if that doesn’t resolve the problem then do a Cold Reset. See page 18 for Cold Reset details.
You would use the utilities to set up and configure your mobile computer. S Intermec web site to download Model 730 mobile computer documents in PDF format. Go to http://www.intermec.com. This site also contains the Intermec technical knowledge ‘Knowledge Cen-...
Page 21
(1) computer to use, exchange data, share data, access and inter- act with the DEVICE, and (ii) the EULA for Microsoft Outlook 2002 is between Intermec Technologies Corporation and the end user - not between the PC manufacturer and end user.
Page 22
Technologies Corporation for leased hardware, you may not rent, lease, or lend the SOFTWARE. · LEASED HARDWARE. In the event that you receive the DE- VICE under the terms of a lease from Intermec Technologies Cor- Model 730 Color Mobile Computer...
Page 23
SOFTWARE upgrades shall be as determined by the lease you signed for the DEVICE; and (iii) you may not use the SOFTWARE after your lease terminates, unless you purchase the DEVICE from Intermec Technologies Corpora- tion.] ·...
Intermec Technologies Corporation support number provided in the documentation for the DEVICE. Should you have any ques- tions concerning this EULA, or if you desire to contact Intermec Technologies Corporation for any other reason, please refer to the address provided in the documentation for the DEVICE.
GRAM. Global Services and Support Warranty Information To understand the warranty for your Intermec prod- uct, visit the Intermec web site at http://www.inter- mec.com and click Service & Support. The Intermec Global Sales & Service page appears. From the Service &...
Products place an order, or check the status of your order. Outside the U.S.A. and Canada, contact your local Intermec representative. To search for your local repre- sentative, from the Intermec web site, click Contact. Model 730 Color Mobile Computer...
Page 28
6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com E 2003 by Intermec Technologies Corporation. All rights reserved. Model 730 Color Mobile Computer Quick Start Guide December 2003 *962054068C PN 962- -054- -068C Model 730 Color Mobile Computer...
Need help?
Do you have a question about the 730 and is the answer not in the manual?
Questions and answers