System Configuration Example For Measurement Triggered By The Internal Ccd Sensor Trigger - Sharp IV-C35M User Manual

System Configuration
(3) When a personal computer is connected
- Purpose/application
Measurement is started by a CCD trigger (sampling start input: personal computer), and the
measurement data is output to a personal computer. The object type number is selected by the
personal computer.
Camera 1 (image)
Camera 2 (image)
3
[2] System configuration example for measurement triggered by the internal CCD
sensor trigger
The internal CCD trigger can be used with camera 1, but with camera 2.
(1) When IV-C35M is used in a stand-alone mode
- Purpose/application
Measurement is started by a CCD trigger, and the measurement result is output externally
(warning lamp etc.). In this case, sampling operation is automatically started.
Camera 1 (image + CCD trigger)
Camera 2 (image)
Remote keypad
Personal
Measurement data
computer
Object type
change signal
Controller
Power supply
(24 VDC)
Controller
Power supply (24 VDC)
Warning lamp etc.
REMOTE RS232C/RS422 CAMERA2 CAMERA1 VIDEO
USB
POWER
OUTPUT
0V COM READY Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
M IV-S3
24V COM X7 X6 X5 X4 X3 X2 X1 X0
INPUT
External trigger
(a photo sensor or proximity
sensor etc.)
REMOTE RS232C/RS422 CAMERA2 CAMERA1 VIDEO
USB
POWER
OUTPUT
0V
M IV-S3 COM READY Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
COM X7 X6 X5 X4 X3 X2 X1 X0
24V
INPUT
External
output
3-4
Monitor
Monitor