Table of Contents
Advertisement
Setting Examples Using the Set Wizard
The "EVALUAT COND" screen will appear.
Select "
down arrow keys. Change the number to "0"
using the up and down arrow keys. Then press
the SET key.
Select "
and "
y DEVIATE" using the up and down arrow
keys, and enter upper and lower limit values. Use
the left and right arrow keys to change between
each digit and use up and down arrow keys to
7
change values of each digit.
For example, when selecting "
"
y DEVIATE," press the SET key and then
move the cursor to the "OUTPUT" column using
the left and right arrow keys. Now, press the SET
key, a popup menu appears. From this popup
menu, select output destination from "NO," "Y,"
and "C."
Move the cursor to "Y" and press the SET key.
Then select the Y0 and press the SET key. Now
the evaluation results will be output to the Y0
terminal.
* In this example, select output Y0 for "
DEVIAT" and output Y1 for "
For details about the evaluation conditions, see page 3-28 in Function and Operation.
After the settings are complete, press the ESC key to return to the "SET WIZARD" screen.
REGISTER NO." using the up and
CONDITION SET," "
x DEVIATE,"
x DEVIATE" or
y DEVIAT."
SCREEN COND SAVE EDIT SEL
EVALUAT COND
1REGISTER NO.
0(0~7)
2CONDITION SET
AUTO(–10%)
3X COORD.
(MDL0)000.0 511.0
4Y COORD.
(MDL0 000.0 479.0
5x DEVIATE
(MDL0 -511.0
6y DEVIATE
(MDL0 -479.0 -479.0
7MATCH LVL
(MDL0 -10000 +10000
8TEST
EXEC(WITH-POSI.ADJ WITHOUT-POSI.ADJ)
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
EVALUAT COND
SCREEN COND SAVE EDIT SEL
1REGISTER NO.
0(0~7)
2CONDITION SET
AUTO(–10%)
3X COORD.
(MDL0)000.0 511.0
4Y COORD.
(MDL0 000.0 479.0
5x DEVIATE
(MDL0 -511.0
6y DEVIATE
(MDL0 -479.0 -479.0
7MATCH LVL
Y OUTPUT
8TEST
EXEC(WITH-POSI.ADJ WITHO
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
x
7-30
RED F C1 BRT
[TEST RESULT]
[OUTPUT]
X0=
NO
Y0=
NO
511.0
x0=
NO
y0=
NO
M0=
NO
RED F C1 BRT
[TEST RESULT]
[OUTPUT]
X0=
NO
Y0=
NO
511.0
x0=
NO
y0=
NO
M0=
Use place
NO
NO
Y
NO
C
NO
NO
NO
NO
NO
NO
Advertisement
Table of Contents
