Table of Contents
Advertisement
Outline
1-4 Measurement program
The IV-C35M integrates the following measurement programs.
Color extraction mode: Color evaluation, color shading (uneven color) inspection, color position
Color filter mode:
You can select operating condition parameters to suit your application of the IV-C35M.
A description of each screen area is shown below.
[1] Color extraction mode
(1) Color evaluation
Purpose
Application
Example
measurement, area measurement by binary conversion, object identification by
binary conversion, and counting objects by binary conversion.
Fault inspection, position deviation measurement, degree of match inspection,
lead inspection, BGA/CSP inspection, area measurement by binary conversion,
counting objects by binary conversion, object identification by binary
conversion, point measurement, multiple position measurement, and multiple
degree of match inspection.
Evaluate whether the extracted color matches the reference.
Inspect arrangement of colored pencils (Check if the colored pencils are arranged in
proper order.)
Captured image
Extracted color (red)
[Inspection procedures]
Capture image
Color extraction (binary conversion)
[Measurement results]
Binary area
Color degree of match
Average hue
Average saturation
Image after extracting a color
Color extracted area
changes to white.
* Other colored pencils are
extracted one after the
other.
Color degree of match = (Binary area / Measurement area size) x 100
1-6
Measured result
Measurement
area
* When the arrangement is
appropriate, all the
measurement area will be
white after extracted each
color one after the other.
Measurement
Advertisement
Table of Contents
