Table of Contents
Advertisement
(5) The brightness of the captured image can be set to one of two levels.
Screen display
BRT
Display the captured image without changing its brightness.
DRK*
Display the captured image at 1/2 the actual brightness
* This is effective when the characters on screen are difficult to read as the screen is dark.
How to select the brightness level
On any screen, except the operation screen, move the cursor to
the "F" (freeze) or "T" (through) position on the upper part of the
screen by pressing the SEL key. Then, press the left or right
arrow key to move the cursor to the "BRT" (bright) or "DRK"
(dark) indicator. Press the up or down arrow key to switch
between bright and dark.
(6) Displays the software version.
(7) Displays the measurement time currently assigned.
(Only when changing the object type)
Time to change
CCD exposure time
object type
(Shutter operation time)
- Serial communication time is not included.
- Set the controller as follows to reduce the measurement time.
1. Increase the shutter speed.
2. Select the "partial" image capture feature for the CCD.
3. Select "NO" for the measurement results display (message display, pattern display, and binary
image display).
(8) Display setting details of each measurement.
MEASURE 0
Measurement
numbers from 0 to 4
(9) Displays the status of input relays X0 to X7: OFF [
Displays the status of output relays Y0 to Y7: OFF [
(10) Displays the status of the ready output: OFF [
(11) The menu bar at the bottom has two rows. When this menu is selected, the second row will
appear.
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
MNU-CHG NEXT-NG CHG-C1 CHG-C2 MANL-MEAS SHORTCUT
The details of each item on this menu bar are shown on the next page.
Description
Actual measurement time
CCD image
capture time
CAM1
NO
Camera 1 or
Measurement
camera 2
program name
6-3
Setting and Operating Outlines
Image
Result output
processing time
time
], ON [
].
], ON [
].
], ON [
].
TRG/BRT
SEL
SET
ESC
6
Advertisement
Table of Contents
