Table of Contents
Advertisement
Setting Examples Using the Set Wizard
REFERENCE COLOR
Select the reference color number that was
registered in the color extraction. (In this example
select 0.)
MEAS SHAPE
Move the cursor to this line and press the SET
key. A popup menu will appear.
Move the cursor to "RECTANGLE", "CIRCLE" or
"ELLIPSE" and press the SET key. In this
example, select "RECTANGLE."
MEAS AREA
Move the cursor to this line and press the SET
key. The "SET" line will be highlighted. Press the
SET key again and the "RECTANGLE" setting
7
screen will appear.
Adjust the size of the rectangle by setting
"
UP.L" and "
right corners) in order to establish the reference
image area.
UP.L The upper left corner of the rectangle can be moved up, down, left, and right.
LO.R The lower right corner of the rectangle can be moved up, down, left, and right.
The rectangle can be moved up, down, left, and right. Select "3MOVE" and
press the SET key to display a cross hair cursor on the screen. Now, move
MOVE
the rectangle by pressing the up, down, left, and right arrow keys. When it is
in position, press the SET key to confirm it.
LO.R" (upper left and lower
REG COND
SCREEN COND SAVE DETAIL
1REGISTER NO
0 (0 7)
2DEFERENCE COLOR 0 (0 7)
3MEAS SHAPE
RECTANGLE
4MEAS AREA
SET (224, 208) (287, 271)
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
RECTANGLE
RESET
1UP. L
(224,208)
2LO. R
(287,271)
3MOVE
=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
7-8
COLOR F C1 BRT
RECTANGLE
CIRCLE
ELLIPSE
RETURN
COLOR F C1 BRT
X:248 Y:232
Advertisement
Table of Contents
