Table of Contents
Advertisement
(12) Select whether or not to set the evaluation
conditions for measured results.
Select "
YES" and press the SET key.
The "DETAIL" item will appear on the lower part
of the screen. Move the cursor to "DETAIL" and
press the SET key.
The "EVALUAT COND" screen will appear.
Select "
REGISTER NO." using the up and
down arrow keys. Change the number to "0"
using the up and down arrow keys. Then press
the SET key.
Select "
CONDITION SET" and "
GRAYS-DIFF" using the up and down arrow keys,
and enter upper and lower limit values. Use the
left and right arrow keys to change between each
digit and use up and down arrow keys to change
values of each digit.
For example, when selecting "
DIFF," press the SET key and then move the
cursor to the "OUTPUT" column using the left and
right arrow keys. Now, press the SET key, a
popup menu appears. From this popup menu,
select output destination from "NO," "Y," and "C."
* "Y" is for terminal block. "C" is for auxiliary relay.
Move the cursor to "Y" and press the SET key.
Then select the Y0 and press the SET key. Now
the evaluation results will be output to the Y0
terminal.
For details about the evaluation conditions,
see page 3-28 in Function and Operation.
After the settings are complete, press the ESC key to return to the "SET WIZARD" screen.
Setting Examples Using the Set Wizard
SET WIZARD
[SAMPLE]
COMPARE EVALUATION
CONDITIONS TO MEASUREMENT
RESULT (YES/NO)
1NO
2YES
EVALUAT COND
1REGISTER NO.
2CONDITION SET
3MAX-GRAYS-DIFF
4MAX-GRAYS
5MIN-GRAYS
6TEST
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
MAX-
EVALUAT COND
1REGISTER NO.
2CONDITION SET
3MAX-GRAYS-DIFF
4MAX-GRAYS
5MIN-GRAYS
6TEST
MAX-GRAYS-
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
7-19
EXIT
TYPE00
Start
STEP1 PARALLEL SERIAL USB
STEP2 CAPTURE IMG/PARTIAL-IMG
STEP3 MEAS1/CAM1
STEP4 MEAS1/F/INSPECT NG
STEP5 MEAS1/MEAS COND
STEP6 MEAS1/EVALUATION
End
SCREEN COND SAVE EDIT SEL
RED
0 (0 7)
[TEST RESULT]
AUTO (–10%)
000. 0
255. 0
SG=
000. 0
255. 0
MXG=
000. 0
255. 0
MNG=
EXEC (WITH-POSI. ADJ WITHOUT-POSI. ADJ)
SCREEN COND SAVE EDIT SEL
RED
0 (0 7)
[TEST RESULT]
AUTO (±10%)
000. 0
255. 0
SG=066.6
000. 0
255. 0
MXG=137.8
000. 0
255. 0
MNG=054.5
Y OUTPUT
Use place
Y0
NO
Y1
NO
Y2
NO
Y3
NO
Y4
NO
Y5
NO
Y6
NO
Y7
NO
F C1 BRT
[OUTPUT]
NO
NO
NO
7
F C1 BRT
[OUTPUT]
OK NO
OK NO
OK NO
NO
Y
C
Advertisement
Table of Contents
