Table of Contents
Advertisement
(11) Setting the registration conditions
REGISTER NO.
The previously specified register number is
displayed. To change the register number,
press the SET key. While the number is
highlighted, press the up and down arrow keys
to change it.
Next, adjust the image you want to measure.
1. Press the SEL key to move the cursor to the
"F" position in the upper function menu.
Press the up and down arrow keys to change
the "F" to "T." Now the image from "CAM1"
will be displayed as a through image on the
monitor.
Note: When the image is difficult to see,
change the image setting between
"BRT" and "DRK." After changing from
the "Freeze" to the "Through" image
display, press the left key once and
then press the up key once. The
"Dark" image setting can be selected.
2. Adjust the focus and aperture of the camera
lens to obtain a clear image of the object.
See pages 5-3.
3. After the measurement object image is
clearly visible, change the image mode back
to "F" (Freeze) using the up and down arrow keys.
By switching the image display mode from "T" to "F," the image will be captured by the IV-
C35M controller.
Note: Whenever you want to register a reference image, the image display mode should be
changed to "F."
4. Press the SEL key and move the cursor from the upper function menu to the "REG COND"
screen.
Setting Examples Using the Set Wizard
REG COND
SCREEN COND SAVE DEL
1REGISTER NO.
2MEAS SHAPE(MDL0)
3REFIMG ARE(MDL0)
4SEARCH ARE(MDL0)
SEL=VALUE INPUT ESC=BACK CEL=CHNG IMG TRG=FUNC
REG COND
SCREEN COND SAVE DETAIL
1REGISTER NO
2MEAS SHAPE (MDL0)
3REF IMG ARE (MDL0)
4SEARCH ARE (MDL0)
=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
7-27
RED F C1 BRT
0(0 7)
RECTANGLE
SET 224.208) (287.271
SET 216.200) (295.279
RED F C1 BRT
0 (0 7)
RECTANGLE
SET
(224, 208) (287, 271)
SET
(216, 200) (295, 279)
7
Advertisement
Table of Contents
