Table of Contents
Advertisement
Setting Examples Using the Set Wizard
(9) Move the cursor to the "
up and down arrow keys, and press the SET key.
Select "POSI-DEVIATION" from the popup menu.
Then, select "NEXT" to move to the next screen.
= In this example, the settings on the screens are not changed. Select "NEXT" on each of these
screens to go to the next screen. =
7
(10) Select a registration number
Move the cursor to "
press the SET key. While this item is highlighted,
press the up and down arrow keys and press the
SET key when the number you want appears.
* In this example, select "0."
Next, move the cursor to "
"SELECT AN IMAGE PROCESSING" line and
press the SET key.
Move the cursor to "
the SET key. Select the "1P" on the popup menu
and press the SET key.
Move the cursor to "
"ENTER A RANGE AND UNITS FOR ROTATION
ANGLE DETECTION" line and select an angle
("NO," "±15˚," "±30˚," "±45˚" or "360˚") on the pop
up menu. When an angle other than "NO" is
selected, "10" is displayed for the "
In this example, select "NO."
The "DETAIL" item will appear in the lower menu.
Move the cursor to "DETAIL" and press the SET key.
Now "REG COND" screen will appear.
MEAS SEL" line using the
STEP5
SELECT TYPE OF CALCULATION
BETWEEN IMAGES
1COMPARE IMG
SELECT WHETHER OR NOT TO
CONVERT IMAGE DENSITY
1CHING GRAY LEVEL
SELECT FILTER TYPE FOR
IMAGE DATA
1SPACE FILTER
RETURN NEXT
Select whether or not to process the captured image.
Calculation between images - See page 3-30 in Function and Operation
Density conversion - See page 3-33 in Function and Operation
Space filter - See page 3-34 in Function and Operation
REGISTER NO. (0 ~ 7)" and
GRAY-SRC" on the
NUM. OF DTECT" and press
DTECT ANGL" on the
UNIT."
SET WIZARD
EXIT
[SAMPLE]
SELECT A COLOR IMAGE
PROCESSING MODE
1COLOR FILTER
2EXTRACT COLOR
COLOR FILTER SET
SELECT A MEASUREMENT TYPE
1MEAS SEL POSI-DEVIATION
NO
NO
NO
SET WEZARD
EXIT
[SAMPLE]
STEP5
1REGISTER NO. 0 7
SELECT AN IMAGE PROCESSING
1NO
2GRAY-SRC
3EDGE DTECT
4SCH EDGE
5ROTAT-SCH(HIGH)
1NUM. OF DTECT
ENTER A RANGE AND UNITS FOR
ROTATION ANGLE DETECTION
1DTECT ANGLE
RETURN NEXT DETAIL
7-26
TYPE00
Start
STEP1 PARALLEL SERIAL USB
STEP2 CAPTURE IMG/PARTIAL-IMG
STEP3 MEAS1/CAM1
STEP4 MEAS1/F/POS DEVIAT
End
DETAIL
NO
POSI-DEVIATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BGA/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG
COLOR F C1 BRT
TYPE00
0
Start
STEP1 PARALLEL SERIAL USB
STEP2 CAPTURE IMG/PARTIAL-IMG
STEP3 MEAS1/CAM1
STEP4 MEAS1/F/POS DEVIAT
STEP5 MEAS1/MEAS CND
1P
End
1P
2P
NO
NO
Advertisement
Table of Contents
