Table of Contents
Advertisement
Setting Examples Using the Set Wizard
= In this example, the settings on the STEP8 (COMPARE MEASUREMENT SETTINGS) to STEP
78 (MAIN OPS MENU) are not changed. Select "NEXT" on each of these screens to go to the
next screen. =
STEP8
COMPARE MEASUREMENT
SETTINGS TO MEASUREMENT
RESULTS (YES/NO)
1NO
2YES(MEAS)
3YES(DST&AGL)
RETURN NEXT
Settings for measurement results.
- For details, see Chapter 19 in
Function and Operation.
STEP8
CALCULATE SETTINGS FOR ALL
MEASUREMENT RESULTS(YES/NO)
1NO
2YES(MEAS)
RETURN NEXT
Settings for the calculations applied
7
to all measurements.
- For details, see Chapter 19 in
Function and Operation.
STEP8
CHANGE DISPLY CONTENTS OF
THE MAIN OPS MENU
1NO
2YES
RETURN NEXT
Settings for displaying the operation
screen.
- For details, see page 6-14 of this
manual.
STEP8
LADDER CIRCUIT AND RESULT
OUTPUT BASED ON MEASUREMENT
AND CALCULATION RESULT (YES/NO)
1NO
2YES(MEAS)
3YES(DST&AGL)
RETURN NEXT
Output settings.
- For details, see Chapter 22 in
Function and Operation.
STEP8
SET LADDER CIRCUIT RESULT
OUTPUT BASED ON ALL
MEASUREMENT AND CALCULATION
RESULTS (YES/NO)
1NO
2YES
RETURN NEXT
Settings for the calculations applied
to all measurements.
- For details, see Chapter 19 in
Function and Operation.
7-10
ADD MEASUREMENT CONDITIONS?
1NO
2YES
RETURN NEXT
Settings for measurement conditions.
- For details, see page 3-1 in
Function and Operation.
STEP8
SELECT AN INTERFACE FOR
OUTPUTTING RESULTS WHEN THE
INPUT IS THE PARALLEL I/F
1NO
2COMPUTER LINK
3SERIAL I/F
RETURN NEXT
Settings of interface to output results.
- For details, see Chapter 22 and 23
in Function and Operation.
Advertisement
Table of Contents
