Table of Contents
Advertisement
Setting Examples Using the Set Wizard
Register extracted color
Select "
keys and then press the SET key. From the
popup menu, select "NEW" or "ADD."
After the colors are registered, the
"REGISTRATION WAS COMPLETED"
message appears.
7
Press the SET key again, the selected area is
converted to binary, and this color is registered
as extraction color number 0.
Press the ESC key to return to the previous
screen.
FINE ADJUSTMENT
On "
SET key to enter the sub-menu screen.
The screen shows "HUE," "CHROMA," (color
saturation) and "BRIGHT LEV" of the registered
extracted color with numeric values and graphs.
Dotted lines on each graph are upper and lower
limits, and the solid line is the center value.
adjust the upper and lower limit values.
REG" using the up and down arrow
REGISTRATION WAS COMPLETED, PRESS SET KEY.
FINE ADJUSTMENT" line, press the
RECTANGLE
RESET
1UP. L
(248,232)
2LO. R
(263,247)
3MOVE
4REG
=DECISION ESC=BACK SEL=CHNG IMG TRG=FUNC
RECTANGLE
RESET
1UP. L
(248,232)
2LO. R
(263,247)
3MOVE
4REG
FINE ADJUSUTMENT
SCREEN SAVE
1EXTRACT COLOR
NO0 (0 7)
[HUE]
2START POINT
080.0
3CENTR
250.0
4END POINT
060.0
[CHROMA]
5U. LM
130.0
6CENTR
120.0
7L. LM
110.0
[BRIGHT LEVEL]
8U. LM
130.0
9CENTR
120.0
0L. LM
110.0
[COLOR DETECT]
69: (EXT COL) REF COL NOT SET
=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
7-4
RETURN
COLOR F C1 BRT
NEW
ADD
UNDO
X:248 Y:232
RETURN
COLOR F C1 BRT
X:248 Y:232
COLOR F C1 BRT
(0 359)
(0 359)
(0 359)
(0 255)
(0 255)
(0 255)
(0 255)
(0 255)
(0 255)
Advertisement
Table of Contents
