Camera - Sharp IV-C35M User Manual

Part Names and Functions

4-2 Camera

[1] Camera
(1) Color camera (IV-C30C5)
2 Cable connector
4
1
Lens holder
2
connector
- To connect a color camera (IV-C30C5) to the IV-C35M controller, use the camera cable (IV-
S30KC3/KC5) shown above.
(2) High-speed monochrome camera (IV-S30C3)
2 Cable connector
1
Lens holder
2
connector
- To connect a high-speed monochrome camera (IV-S30C3) to the IV-C35M controller, use camera
cable (IV-S30KC3/KC5) shown above.
1 Lens holder
Name
The holder is used to make fine adjustment to the distance (back plane fo-
cus) between the CCD section and camera lens using a focus fixed lens.
(The distance has been adjusted before shipment. Usually, it does not
need to be adjusted.)
- To adjust it, loosen the upper lock screw, and turn the lens holder coun-
ter-clockwise. The maximum allowable distance is 1.5 mm.
Cable
Connect this connector to the camera cable (IV-S30KC3/KC5).
1 Lens holder
Name
The holder is used to make fine adjustment to the distance (back plane fo-
cus) between the CCD section and camera lens using a focus fixed lens.
(The distance has been adjusted before shipment. Usually, it does not
need to be adjusted.)
- To adjust it, loosen the upper lock screw, and turn the lens holder coun-
ter-clockwise. The maximum allowable distance is 1.5 mm.
Cable
Connect this connector to the camera cable (IV-S30KC3/KC5).
Lock screw (for securing the lens holder)
CCD section
A
Front view (view A) of the CCD
Function
Lock screw (for securing the lens holder)
CCD section
A
Front view (view A) of the CCD
Function
4-2