Table of Contents
Advertisement
Setting and Operating Outlines
2. A pop up menu will appear and you can chose
"CHANGE," "ADD," or "DELET" from it.
Or, while the cursor is in the "
CHART," move the cursor to any desired step
number and press the SET key. You can then edit
that step. (You cannot delete a step using this
access method.)
3. To quit editing, press the TRG/BRT key and move
6
the cursor to "EXIT" in the upper function menu.
Then, press the SET key. (Or, press the ESC key
twice.)
4. The screen will ask "SAVE OK?." Move the cursor to "OPERATION
CHART" or "NEW SAMPLE" using the up and down arrow keys, and
press the SET key.
- The changes will be written into the current operation chart.
- Save as new sample (The original operation chart will not be
changed.)
Note: To change the sample, you can select "NOW SAMPLE" or
"NEW SAMPLE."
SET WIZARD
[ SAMPLE ]
OPERATION
1CHG-TYPE
2STANDARD WIZARD
3OPERATION CHART
SET WIZARD
[ SAMPLE ]
STEP4
SELECT A CAMERA TO SPECIFY
MEASUREMENT CONDITIONS
1NO REGISTRATION
2CAM1
3CAM2
6-10
SCREEN EDIT SAVE
TYPE00
CHANGE
Start
ADD
STEP1
PARALLEL+SERIAL+USB
DELET
STEP2
CAPTURE IMG/PARTIAL-IMG
STEP3
COLOR IMAGE CORRECT
STEP4
MEAS1/CAM1
STEP5
MEAS1/F/BIN-AREA
STEP6
MEAS1/WINDOW/MASK,1
STEP7
MEAS1/MEAS CND
STEP8
MEAS1/EVALUATION
STEP9 MEAS1/CALC
STEP10 MEAS1/OUT
STEP11 FINAL NUMERIC CALC
STEP12 FINAL OUTPUT COND
STEP13 SERIAL OUTPUT/ANY
STEP14 OPS MENU COND
STEP15 CALIBRATION/YES
STEP16 MOVE ALL WINDOW/YES
STEP17 TITLE/YES
End
EXIT
COLOR F C1 BRT
TYPE00
Start
STEP1
PARALLEL+SERIAL+USB
STEP2
CAPTURE IMG/PARTIAL-IMG
STEP3
COLOR IMAGE CORRECT
STEP4
MEAS1/CAM1
STEP5
MEAS1/F/BIN-AREA
STEP6
MEAS1/WINDOW/MASK,1
STEP7
MEAS1/MEAS CND
STEP8
MEAS1/EVALUATION
STEP9 MEAS1/CALC
STEP10 MEAS1/OUT
STEP11 FINAL NUMERIC CALC
STEP12 FINAL OUTPUT COND
STEP13 SERIAL OUTPUT/ANY
STEP14 OPS MENU COND
STEP15 CALIBRATION/YES
STEP16 MOVE ALL WINDOW/YES
STEP17 TITLE/YES
End
SET WIZARD
EXIT
[ SAMPLE ]
SAVE OK?
OPERATION CHART
NEW SAMPLE
YES=SET, NO=ESC
F C1 BRT
Advertisement
Table of Contents
