Table of Contents
Advertisement
(15) The sample is registered with the title you assigned to on the
"SET WIZARD" screen.
Note 1: If no title was assigned, the sample settings are simply
listed as "Sample *"
Note 2: A maximum of eight sample settings can be assigned.
(16) The monitor will return to display the operation screen.
To return to the operation screen, press the ESC key twice, or move the cursor to "SCREEN" in the
upper menu area using TRG/BRT key. Then, select "OPS-MENU" from the popup menu.
(17) Execute a measurement.
While the operation screen is displayed, press the TRG/BRT key. The measurement results will be
displayed on the screen.
*1 The final evaluation result will be displayed as "OK" in the upper left corner of the screen when
all of the items have been evaluated acceptable.
If there is a single unacceptable item, "NG" will be displayed.
*2 "M0 +09735" means that the degree of match (percentage of pixels that match) between pixels
in the stored image and the measured image is 97.35%.
[The acceptance and rejection criteria based on the degree of match]
In order to evaluate acceptability based on the degree of match, first an image of a good
specimen is stored for reference. Then, an image of defective specimen is compared for degree
of match. Finally an image of another good specimen is compared. These comparisons establish
the degree of match to be used for setting the limits used for working comparisons.
For example, the degree of match for a non-defective object is 90% or more and that for a
defective object is 70% or less, then the threshold value for degree of match can be set to
approx. 85%. This allows the evaluation acceptability to be made.
*3 When the final evaluation result is OK, Y0 is turned ON, and a filled box
the result is NG, an empty box
Final evaluation result (*1)
Measuring time
Registration number
Detection coordinates of the
reference image
Amount of deviation from the
reference image
Degree of match of the
reference image (*2)
is displayed.)
7-33
Setting Examples Using the Set Wizard
SET WIZARD
[ SAMPLE ]
1CHG-TYPE
2STANDARD WIZARD
3OPERATION CHART
4AREA
Register as a sample
(TYPE00) AAA
12: MEASURE 0 CAM1
OK
0022ms 2002-02-04 16:13
1
REGISTER NO. 0 (0 7
X0=110.0
OK
Y0=132.0
OK
x0=+000.0
OK
y0=000.0
OK
M0=000.0
OK
B0=
*3
Y0 7
X0 7
MNU-CHG
MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
SCREEN SAVE DEL
TYPE00
Start
End
COLOR F C1 BRT
V3. 03C
READY
is displayed. (When
7
Advertisement
Table of Contents
