Table of Contents
Advertisement
Setting Examples Using the Set Wizard
(14) The sample is registered with the title you assigned to on the
"SET WIZARD" screen.
Note 1: If no title was assigned, the sample settings are simply
listed as "Sample *"
Note 2: A maximum of eight sample settings can be assigned.
(15) The monitor will return to display the operation screen.
To return to the operation screen, press the ESC key twice, or move the cursor to "SCREEN" in the
upper menu area using TRG/BRT key and select "OPS-MENU" from the popup menu.
(16) Execute a measurement.
While the operation screen is displayed, press the TRG/BRT key. The measurement results will be
displayed on the screen.
7
*1 The final evaluation result will be displayed as "OK" in the upper left corner of the screen when all
of the items have been evaluated acceptable.
If there is a single unacceptable item, "NG" will be displayed.
*2 When the final evaluation result is OK, Y0 is turned ON, and a filled box
result is NG, an empty box
Final evaluation result (*1)
Measuring time
Registration number
Measured binary area
Hue
Saturation (chroma)
Color degree of match
is displayed.)
7-12
SET WIZARD
[ SAMPLE ]
1CHG-TYPE
2STANDARD WIZARD
3OPERATION CHART
4AREA
Register as a sample
(TYPE00) AAA
12: MEASURE 0 CAM1
OK
0019ms 2002-02-04 16:13
1
REGISTER NO. 0 (0 7
A =
H =
S =
CM=
X0 7
Y0 7
MNU-CHG
MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
is displayed. (When the
SCREEN SAVE DEL
TYPE00
Start
End
COLOR F C1 BRT
V3. 03C
READY
Advertisement
Table of Contents
