Table of Contents
Advertisement
Setting Examples Using the Set Wizard
(5) Move the cursor to "
= In this example, the settings on the screens from the STEP1 to STEP 3 (CORRECT POSITION) are
not changed. Select "NEXT" on each of these screens to go to the next screen. =
(1) Press the up or down arrow key several times to move
the cursor to the "NEXT" item.
(2) Press the SET key.
STEP1
SELECT THE MEASUREMENT
START INPUT I/F
1PARALLEL+SERIAL+USB
7
2TRIG CCD START
NEXT DETAIL
This screen is used to select the
signal that the system will use to start
making a measurement.
The default is
"1PARARELL+SERIAL+USB."
- For details, see page 21-1 in
Function and Operation.
CCD trigger
- For details, see page G-2.
(6) Select a camera in order to specify measurement
conditions
Move the cursor to "
up and down arrow keys, and press the SET key.
Note: If you select "NO REGISTRATION", you cannot
set the measurement conditions.
STANDARD WIZARD" and press the SET key. The set wizard will start.
How to go to next step while leaving the current step in
the Set Wizard unchanged.
STEP2
SELECT AN IMAGE CAPTURING
METHOD DURING OPERATION
1PARTIAL-IMG
2ALL IMAGE
3NO CAPTURED
ENTER A SHUTTER SPEED
1/30 1/10000
1SHUTTER SPEED
RETURN NEXT
Select a method to capture image.
The default is "1PARTIAL-IMG."
CAM1" or "
CAM2" using the
STEP1
SELECT THE MEASUREMENT
START INPUT I/F
1PARALLEL+SERIAL+USB
2TRIG CCD START
NEXT DETAIL
STEP3
CORRECT POSITION?
1NO
2CAM1
3CAM2
RETURN NEXT
1/00060
Specify whether or not to correct the
captured image.
- For details, see page 3-42 in
Function and Operation.
SET WIZARD
EXIT
STEP3
SELECT A CAMERA TO SPECIFY
MEASUREMENT CONDITIONS
1NO REGISTRATION
2CAM1
3CAM2
RETURN NEXT
7-2
COLOR F C1 BRT
TYPE00
Start
STEP1 PARALLEL SERIAL USB
STEP2 CAPTURE IMG/PARTIAL-IMG
STEP3 MEAS1/CAM1
End
Advertisement
Table of Contents
