Table of Contents
Advertisement
Setting Examples Using the Set Wizard
= In this example, the settings on the screens are not changed. Select "NEXT" on each of these
screens to go to the next screen. =
(10) Select a registration number
Move the cursor to "
press the SET key. While this item is highlighted,
press the up and down arrow keys and press the
SET key when the number you want appears.
7
Next, move the cursor to "
DIFFERENC" on the "SELECT AN INSPECTION
MODE" line and press the SET key.
The "DETAIL" item will appear in the lower menu.
Move the cursor to "DETAIL" and press the SET
key.
Now "REG COND" screen will appear.
STEP5
SELECT TYPE OF CALCULATION
BETWEEN IMAGES
1COMPARE IMG
SELECT WHETHER OR NOT TO
CONVERT IMAGE DENSITY
1CHING GRAY LEVEL
SELECT FILTER TYPE FOR
IMAGE DATA
1SPACE FILTER
RETURN NEXT
Select whether or not to process the captured image.
Calculation between images - See page 3-30 in Function and Operation
Density conversion - See page 3-33 in Function and Operation
Space filter - See page 3-34 in Function and Operation
REGISTER NO. (0 ~ 7)" and
PROXIMITY
NO
NO
NO
SET WIZARD
EXIT
[SAMPLE]
1REGISTER NO. (0 7) 0
1NO
2PROXIMITY DIFFERENC
2TOTAL DEFFERENCE
7-16
TYPE00
Start
STEP1 PARALLEL SERIAL USB
STEP2 CAPTURE IMG/PARTIAL-IMG
STEP3 MEAS1/CAM1
STEP4 MEAS1/F/INSPECT NG
STEP5 MEAS1/MEAS COND
End
Advertisement
Table of Contents
