Table of Contents
Advertisement
4. ESC key
Press the ESC key to return to the previous screen.
SCREEN
Move the cursor to "SCREEN" and press the
SET key. A pop up menu will appear. Select
the desired item using the up and down arrow
keys and press the SET key.
"OPS-MENU": Return to the operation screen.
"RETURN": Return to the MAIN MENU.
SAVE
Move the cursor to the "SAVE" and press the
SET key. The Save Settings screen will
appear. Press the SET key and select "YES,"
the current setting data will be stored in flash
memory. If you press the ESC key and select
"NO," the controller will close the screen
without saving the current setting data.
DEL
Deletes the sample selected.
CHG-TYPE
Move the cursor to "
the up or down arrow key. The object number
shown on the right side of the monitor will
change. Use the number to determine the
object type number to set using the standard
wizard. (Or, use the number to select an
object number operation chart to display. See
page 6-9).
For details about the setting measurement conditions using the Set Wizard,
See "Chapter 7: Setting Examples Using the Set Wizard."
CHG-TYPE" and press
6-7
Setting and Operating Outlines
SET WIZARD
SCREEN SAVE DEL
[ SAMPLE ]
1CHG-TYPE
2STANDARD WIZARD
3OPERATION CHART
SET WIZARD
SCREEN SAVE DEL
[ SAMPLE ]
1CHG-TYPE
2STANDARD WIZARD
3OPERATION CHART
DATA SAVE? (YES=[SET]/NO=[ESC])
SET WIZARD
SCREEN SAVE DEL
[ SAMPLE ]
1CHG-TYPE
2STANDARD WIZARD
3OPERATION CHART
TRG/BRT
SEL
SET
ESC
COLOR F C1 BRT
TYPE00
Start
End
COLOR F C1 BRT
TYPE00
Start
End
COLOR F C1 BRT
Change using the up and
down arrow keys.
TYPE
00
Start
End
6
Advertisement
Table of Contents
