Table of Contents
Advertisement
(2) Installing the camera body
Attach the camera (IV-C30C5, IV-S30C3) on the mounting surface with the camera angle bracket
(supplied with the camera).
- Installation example 1
Camera front view
IV-C30C5, IV-S30C3
- Installation example 2
IV-C30C5, IV-S30C3
- Installation example 3
IV-C30C5, IV-S30C3
Camera angle bracket
Installation procedure
1. Attach the camera angle bracket to the tapped M3 hole on the camera body (20 mm mounting
pitch: one of three holes). Two screws (M 3 x 6) are supplied with the camera for attaching the
angle.
2. Attach the camera controller angle to the mounting surface with the slotted holes 3.2 mm wide
(20 mm mounting pitch) or 1/4-20 UNC threaded hole.
The external dimensions of the camera angle bracket and the IV-C30C5, IV-S30C3 camera body are
shown on the following page.
Camera side view
Camera angle bracket
Mounting
surface
Camera angle bracket
Mounting
surface
Mounting
surface
5-17
Connection and Installation Methods
Camera lens
(IV-S20L16 or similar)
5
Advertisement
Table of Contents
