Yamaha YZ250F(N)/LC Owner's Service Manual page 144

˜ Pass
the cylinder
breather hose through the hose
guide.
ˆ Fasten the neutral switch lead
and CDI magneto lead.
Ø Pass the clutch cable on the
inside the cylinder
breather hose.
∏ Pass the clutch cable in front of
the radiator mounting boss.
CABLE ROUTING DIAGRAM
ΠFit the brake hose into the
head
guides on the protector.
 Pass the carburetor breather
hoses and overflow hose so
that all there hoses do not con-
tact the rear shock absorber.
Í Fasten
head the
together with the ignition coil.
2 - 19
Ê Do not allow the engine stop
switch
between the two clamps.
Ë Pass the clutch cable through
the cable guides.
√ Position each lead at the lower
ground lead left of the main tube (frame).
SPEC
leads to slacken