Installing The Lcd Mask - Toshiba TECRA M10 Maintenance Manual

4 Replacement Procedures

Installing the LCD mask

To install the LCD mask, follow the steps below and refer to Figure 4-64 to 4-65.
1. Set the LCD mask to the hinge standing.
2. Lay the LCD mask down and secure it with the following screws.
CAUTION: When laying the LCD mask down, hold the LCD mask with the hinge and lay
them down carefully.
•
M2.5×4B
•
M2.5×6C
4-106 [CONFIDENTIAL]
FLAT HEAD screw
Tapping screw
×2
×2
TECRA M10 Maintenance Manual (960-685)
4.33 LCD mask