Toshiba TECRA M10 Maintenance Manual page 369

4.35 Fluorescent Lamp
Assembly of outside tape/Cover shield
1. Assembly of Cover shield (S)1.
CAUTION: Pressure or stress should not be given on Source PCB. Usage of gloves with
anti-electric discharge coating is recommended to eliminate possible
damage on circuits occurred by ESD.
2. Assembly of Tape Adhesive2 used for Top case fixing.
CAUTION: Pressure or stress should not be given on Top case during this process.
Figure 4-95 Replacing 14.1-inch LG fluorescent lamp (WXGA-CSV) (8)
TECRA M10 Maintenance Manual (960-685)
4 Replacement Procedures
[CONFIDENTIAL] 4-137