Drives I/O; Pci Bus; Display - Toshiba TECRA M10 Maintenance Manual

3.31 SETUP

9. Drives I/O

This option displays the address and interrupts level for hard disk drive and optical
disk drive. It is for information only and cannot be changed.
(a) Built-in HDD
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port0
(b) ODD
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port1
(c) eSATA
This item displays the Serial ATA Port Number. It is for information only and
cannot be changed.
Serial ATA Port4
(d) SATA Controller Mode
This feature sets the SATA Controller Mode.
AHCI
Compatibility

10. PCI Bus

This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS

11. Display

This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
TECRA M10 Maintenance Manual (960-685)
Sets AHCI which is the mode for VistaTM (default)
Sets the mode for legacy OS. Use this mode when the
driver corresponding to AHCI is not used.
= IRQ10, IRQ11
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
[CONFIDENTIAL]
3 Tests and Diagnostics
3-93