Removing The 3G Card - Toshiba TECRA M10 Maintenance Manual

Hide thumbs Also See for TECRA M10:

Table of Contents

4.13 3G card

Removing the 3G card

To remove the 3G card, follow the steps below and refer to Figure 4-23.

1. Disconnect the 3G antenna cables from the 3G card using an antenna coaxial cable

disconnector.

2. Remove the following screws securing the 3G card.

M2.0×4B BIND screw

3. Disconnect the 3G card from the connector on the system board.

TECRA M10 Maintenance Manual (960-685)

M2.0x4B BIND

3G antenna cable (red)

Figure 4-23 Removing the 3G card

4 Replacement Procedures

3G antenna cable (blue)

[CONFIDENTIAL]

Show Quick Links

Table of Contents