Toshiba TECRA M10 Maintenance Manual page 172

3 Tests and Diagnostics
NG message appears in the display if a defective is found during the test.
Confirm the connection of cable, then execute the test again.
Press 9 and return to ONLY ONE TESST menu.
Subtest 05 LED
This subtest checks if each LED lights properly.
The following message appears in the display in order. Follow the instructions
in the display to execute the test.
[HDD Access LED test]
Confirm the LED of HDD status blinks properly.
Press any key and following message appears in the display.
[Caps/Num/Overlay BT/W-LAN LED test]
Confirm each LED lights properly.
(1)
(2)
(3)
(4)
Press Enter and following message appears in the display.
Check [DC-IN]&[Power]&[Main Battery]LED= Green
Check if the each LED lights in the same color as the message in the display
(Message switches
Press Enter and return to the ONLY ONE TEST menu.
3-44 [CONFIDENTIAL]
Press [Caps Lock ] key ! ...Caps
Press [Fn + F10
Press [Fn + F11
Slide [BT/W-LAN switch L&R]!
<->
Green Orange
] key ! ...Arrow
] key ! ...Num
).
TECRA M10 Maintenance Manual (960-685)
3.20 ONLY ONE TEST
(on/off)
(on/off)
(on/off)
(on/off)