Removing The Lcd Mask - Toshiba TECRA M10 Maintenance Manual

4 Replacement Procedures
4.33 LCD mask

Removing the LCD mask

To remove the LCD mask, follow the steps below and refer to Figure 4-64 to 4-65.
1. Remove the following screws and stand the LCD mask.
CAUTION: When standing the LCD mask, hold the LCD mask with the hinge and stand
them carefully.
•
M2.5×4B
•
M2.5×6C
M2.5x4B FLAT HEAD
4-104 [CONFIDENTIAL]
FLAT HEAD screw
Tapping screw
LCD mask
Figure 4-64 Removing the LCD mask (1)
×2
×2
M2.5x6C Tapping
M2.5x4B FLAT HEAD
TECRA M10 Maintenance Manual (960-685)
4.33 LCD mask