Pci Express Link Aspm; Enhanced C-States; I/O Ports - Toshiba TECRA M10 Maintenance Manual

3 Tests and Diagnostics
(b) PCI Express Link ASPM
This option set the power-saving function of PCI Express on the following
conditions.
Auto
Disabled
Enabled
(c) Enhanced C-States
*Core2 model only
This option set the power-saving function of Enhanced C-States on the
following conditions.
Enabled
Disabled

8. .I/O ports

This option controls settings for the parallel port.
NOTE: Do not assign the same interrupt request level and I/O address to the serial port
and PC card.
(a) Serial
Use this option to set the COM level for the serial port. The serial port
interrupt request level (IRQ) and I/O port base address for each COM level is
shown below:
COM level
COM1
COM2
COM3
COM3
COM3
COM4
COM4
COM4
Not Used
3-92 [CONFIDENTIAL]
PCI Express devices are not used while battery
operation. (Default)
Disable the Power-saving function and drive
with maximum performance.
PCI Express devices are not used.
This lowers the power consumption. (Default)
This does not lower the power consumption.
Interrupt level I/O address
4
3
4
5
7
3
5
7
Disables port
3F8H (Serial port default)
2F8H
3E8H
3E8H
3E8H
2E8H
2E8H
2E8H
TECRA M10 Maintenance Manual (960-685)
3.31 SETUP