Pc Card/Bridge Media/Smart Card; Removing The Pc Card; Installing The Pc Card - Toshiba TECRA M10 Maintenance Manual

4.4 PC card/Bridge media/Smart card

4.4 PC card/Bridge media/Smart card
4.4.1 PC card

Removing the PC card

To remove the PC card, follow the steps below and refer to Figure 4-4.
CAUTION: Insert or remove a PC card in accordance with any instructions in their
manual or the manuals of the computer system you are using.
1. Press the eject button for the PC card to extend the button.
2. Press the extended eject button to pop the PC card out.
3. Grasp the PC card and pull it out.
Eject button

Installing the PC card

To install the PC card, follow the steps below and refer to Figure 4-4.
1. Insert the PC card into the card slot.
2. Push it carefully to ensure a firm connection.
TECRA M10 Maintenance Manual (960-685)
PC card
Figure 4-4 Removing the PC card
4 Replacement Procedures
[CONFIDENTIAL] 4-15