Toshiba TECRA M10 Maintenance Manual page 102

2 Troubleshooting Procedures
Check 2 The SATA ODD may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures and check the operation. If the
problem still exists, perform Check 3.
Check 3 The ODD FPC may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures. If the problem still exists,
perform Check 4.
Check 4 System board may be faulty. Replace it with new one following the instructions in
Chapter 4, Replacement Procedure.
2-50 [CONFIDENTIAL]
2.10 Optical Disk Drive Troubleshooting
TECRA M10 Maintenance Manual (960-685)