Removing The Wireless Lan Card - Toshiba TECRA M10 Maintenance Manual

Hide thumbs Also See for TECRA M10:

Table of Contents

4.12 Wireless LAN card

Removing the Wireless LAN card

To remove the wireless LAN card, follow the steps below and refer to Figure 4-22.

1. Disconnect the wireless LAN antenna cables from the wireless LAN card (white

cable from Main and black cable from Aux) using an antenna coaxial cable

disconnector.

2. Remove the following screws securing the wireless LAN card.

M2.0×4B BIND screw

3. Disconnect the wireless LAN card from the connector on the system board.

Wireless LAN antenna cable

TECRA M10 Maintenance Manual (960-685)

M2.0x4B BIND

Figure 4-22 Removing the wireless LAN card

4 Replacement Procedures

Wireless LAN card

[CONFIDENTIAL]

Show Quick Links

Table of Contents