Installing The Battery Lock - Toshiba TECRA M10 Maintenance Manual

4.26 Battery lock

Installing the Battery lock

To install the battery lock, follow the steps below and refer to Figure 4-48.
1. Insert the sticks of the battery lock L and battery lock R into the springs.
2. Turn up the insulator (BATT LOCK L INSULATOR) and set the battery lock L to
the slot.
3. Set (push) the battery lock button L to the battery lock L until the latches are
engaged.
4. Set the battery lock R to the slot.
5. Set (push) the battery lock button R to the battery lock R until the latches are
engaged.
TECRA M10 Maintenance Manual (960-685)
4 Replacement Procedures
[CONFIDENTIAL] 4-77