Pressed Key Display (Main Key) - Toshiba TECRA M10 Maintenance Manual

3.20 ONLY ONE TEST
Subtest 01

Pressed Key Display (Main key)

When you execute this subtest, the keyboard layout is drawn on the display as
shown below. When any key is pressed, the corresponding key on the screen
changes to the key character that was pressed. Holding a key down enables the
auto-repeat function that causes the key's display character to blink.
Press Del + Enter to end the test.
TECRA M10 Maintenance Manual (960-685)
IF TEST OK, Press [Dell][Enter]key
[CONFIDENTIAL]
3 Tests and Diagnostics
]3-41