4.34 Hinge
4 Replacement Procedures
4.34 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-66 and 4-67.
1. Remove the following screw securing the brake hinge L.
•
×1
M2.5×6C
Tapping screw
2. Release two hooks and remove the brake hinge L through the hole.
M2.5x6C Tapping
Hook
Brake hinge L
Figure 4-66 Removing the hinge (1)
TECRA M10 Maintenance Manual (960-685)
[CONFIDENTIAL]
4-107