Removing The Cover Assembly And Base Assembly - Toshiba TECRA M10 Maintenance Manual

4 Replacement Procedures
4 Replacement Procedu es r
4.16 Cover assembly and Base assembly

Removing the Cover assembly and Base assembly

To remove the cover assembly and base assembly, follow the steps below and refer to Figure
4-28 to 4-30.
1. Close the display and turn over the computer.
2. Remove the following screws.
•
M2.5×16B
•
M2.5×10B
•
M2.5×5B
"10"
"16"
"10"
"10"
Figure 4-28 Removing the cover assembly and base assembly(1)
4-46 [CONFIDENTIAL]
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
"5" "5"
4.16 Cover assembly and Base assembly
×3 ("16" in the figure below)
×8 ("10" in the figure below)
×2 ("5" in the figure below)
"10"
"10"
"16"
TECRA M10 Maintenance Manual (960-685)
"16"
"10"
"10"
"10"